Guide to Flash Lenovo VIBE X S960 to fix Bootloop using Flash Tool.

Flash Or Install Firmware Lenovo VIBE X S960. You can follow this guide when your Android Lenovo VIBE X S960 device is got bootloop. And now on this guide we will show to you how to flash your Android Lenovo VIBE X S960 device using Stock Firmware or Flash file. So, why your device got bootloop ? There is not definitive answer to explain it, but generally bootloop on this device occured when already rooted. but it not sure, also on unrooted android device may occured bootloop.

Not only Android system failure caused your device become bootloop, but sometimes it caused by user activity. So, if your are a new Android user you must be carefully to use your Android device. On this guide Guidebelajar will explain to you how to flashing android device on Lenovo VIBE X S960  with easy and simple step using CWM recovery.

Flashing in android is the same way like fresh install on the windows PC, So by perform a flash on Android you will give a new performance like a new phone. One reason that you should perform a flash your android is because your android get bootloop or when you failed to install Stock ROM Mod.

Lenovo VIBE X S960 announced in September, 2013, and Released 2014, December, Lenovo VIBE X S960  Android is a smartphone with a 5,0-inch IPS capacitive touchscreen, 16M colors, works on Android OS, v4.2 (Jelly Bean) system and powered Quad-core 1.5 GHz Cortex-A7 CPU, Mediatek MT6589T chipset and PowerVR SGX544MP2 GPU as their engine, and combined with 2 GB RAM, and 13 MP on main camera, and 5 MP on secondary camera.

Prerequisites.

Provide this tool and file before you perform flash on bootloop Android Lenovo VIBE X S960.

< li>You must download and install USB Driver for Lenovo on your windows computer or PC. Here
1. Download Stock Firmware (Flash File)for Lenovo VIBE X S960 Here.
2. Original USB cable for Lenovo VIBE X S960.


3. Your Lenovo VIBE X S960 device must installed CWM recovery, see this guide 

How to Install or flash Lenovo VIBE X S960 using flash tool.

1. To use this second method you must download this tool first ;
• Flash Tool
• Firmware Lenovo VIBE X S960
• Driver MTK
2. Please make sure to unzip this archive.


3. Then remove your back case, battery, sim card and SD Card &n bsp;if installed
4. Next, Connect your Lenovo VIBE X S960 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
5. Then, release USB data cable from the PC.
6. Open SP flash tool software and click scatter load. find Lenovo VIBE X S960 scatter storage location earlier.
7. In the Scatter Loading field go to the folder where you extracted the Flash Tool and select target_bin

   

   Flash / Install Firmware Lenovo VIBE X S960.

8. Then you click options ->Download -> then check DA DL all with checksum.

   

   Flash / Install Firmware Lenovo VIBE X S960.

9. On download tab, ensure you have selected download only option from dropdown menu, see below picture.

   

   Flash / Install Firmware Leno vo VIBE X S960.

10. Then, click download button on top right and connect your Lenovo VIBE X S960 with USB cable in phone switch off position.

    

    Flash / Install Firmware Lenovo VIBE X S960.

11. Process will run automatic, and you can s ee the red stripe showing download percentage at bellow
12. When your process complete, you can see a green circle with tick mark. 

    

    Flash / Install Firmware Lenovo VIBE X S960.

13. Now disconnect your Lenovo VIBE X S960
14. Intall you battery again. 
15. Then, start your Lenovo VIB E X S960. (remember, on the first booting it will take a long time to start)
16. Success. enjoy.