Guide To Flash or Install Stock Rom On Bricked / Bootloop Micromax Canvas Juice 3 Q392.

Install Stock Rom Micromax Canvas Juice 3 Q392. (This guide just for Micromax Canvas Juice 3 Q392) Guidebelajar on this guide will explain to you how to flashing android device on Micromax Canvas Juice 3 Q392 with easy and simple step. Micromax Canvas Juice 3 Q392 comes with IPS LCD capacitive touchscreen, 5,0 Inches wides, Android OS, v5.1 (Lollipop) and supported with Mediatek MT6580 chipset, Quad-core 1,3 GHz CPU, combined with 2 GB of RAM as their engine. And you can enjoy exciting 8 MP on main camera, and 2 MP on secondary camera. And this devices released 2015, September.

Install Stock Rom On Bricked/Bootloop Micromax Canvas Juice 3 Q392.

Flashing in android is the same way like fresh install on the windows PC, So by perform a flash on Android you will give a new performance like a new phone. One reason that you should perform a flash your android is because your android get bootloop or when you failed to install Stock ROM Mod.

Do you know what is bootloop, Ok.. now I will explain to you what si bootloop. Some people say that bootloop is a problem that occured on an android system which the android system could not start up going to the homescreen menu. And its happened is automatically return to the initial state on the first time when you turn on the Micromax Canvas Juice 3 Q392. And the device will stop to display on the smartphone logo. 

Now, follow the isntruction list bellow, do it with your own risk.

Prepare Flash Micromax Canvas Juice 3 Q392.

1. A computer with windows OS,
2. Original USB Cable Micromax Canvas Juice 3 Q392
3. MTK Driver_Auto_Installer_v5.1453.03, Here
4. SPFlash Tool for windows Here (you must be a registered user)


5. Stock Rom Lollipop For Micromax Canvas Juice 3 Q392. Here 
6. To ensure what is firmware used by your device now, you can check by go to Setting ->About -> Software Information ->Build Number.

Flashing Micromax Canvas Juice 3 Q392.

1. At the first time,download the linked file from above. 
2. If your Micromax Canvas Juice 3 Q392 in normal condition, Power Off now
3. But, If your device in bootloop state, you can try reboot to stock recovery by pressing both volume up and power button, then press power down option to turn off your phone.
4. Remove battery from your phone.
5. Extract and install MTK Driver_Auto_Installer_v5.1453.03.
6. Then extract SPFlash Tool for windows, and run as administrator on flashtool.exe
7. Once SP Flashtool is launched, click on the download tab.
   

   sp flash tool - download tab

8. Then click scatter load. find Micromax Canvas Juice 3 Q392 scatter storage location earlier. (the scatter file can be found by extracting Micromax Canvas Juice 3 Q392 stock rom lollipop.rar)
9. In the Scatter Loading field go to t he folder where you extracted the Flash Tool and select scatter.txt.
   
   
    

   

   Install Stock Rom Micromax Canvas Juice 3 Q392.

10. Then you click options ->Download -> then check DA DL all with checksum.

    

    Install Stock Rom Micromax Canva s Juice 3 Q392.

11. On download tab, ensure you have selected download only option from dropdown menu, see below picture.

    

    Install Stock Rom Micromax Canvas Juice 3 Q392.

12. Then, click down load button on top right and connect your Micromax Canvas Juice 3 Q392 with USB cable in phone switch off position.

    

    Install Stock Rom Micromax Canvas Juice 3 Q392.

13. Process will run automatic, and y ou can see the red stripe showing download percentage at bellow
14. When your process complete, you can see a green circle with tick mark. 

    

    Install Stock Rom Micromax Canvas Juice 3 Q392.

15. Now disconnect your Micromax Canvas Juice 3 Q392< /li>
16. Install you battery again. 
17. Then, start your Micromax Canvas Juice 3 Q392. (remember, on the first booting it will take a long time to start)
18. When everything complete you must go to settings and do a factory data reset, this will make your phone go faster and becomes normal.
19. Success. enjoy